An Obd2 Wifi Port allows you to unlock a wealth of information about your car using your smartphone or tablet. This guide provides a step-by-step walkthrough on how to connect to your vehicle’s OBD2 port using a WiFi-enabled OBD2 adapter and the Car Scanner app.
Connecting to your car’s OBD2 WiFi port opens up a world of diagnostics and data. By following these simple steps, you can monitor your car’s performance, diagnose issues, and even clear trouble codes. Let’s get started.
Setting Up Your OBD2 WiFi Connection
First, ensure you have a WiFi-enabled OBD2 ELM327 adapter. Plug it into your car’s OBD2 port, usually located under the dashboard on the driver’s side. Turn the ignition on or start the engine. If your adapter has a power button, press it.
Step 1: Connecting to the Adapter’s WiFi Network
Open your phone or tablet’s WiFi settings and enable WiFi. Locate the network created by your OBD2 adapter. Common names include “OBDII,” “OBD2,” “WIFI_OBDII,” or variations including the adapter brand (e.g., “VLINK” for VGate adapters). Most adapters don’t require a password, but consult your adapter’s documentation if needed. Remember, the network name will not reflect your car’s brand.
Step 2: Configuring the Car Scanner App
Open the Car Scanner app and navigate to Settings (gear icon in the top-right corner).
Tap on “Adapter” (or “Connection” in older versions).
Choose “Wi-Fi” as the connection type.
Verify the adapter’s IP address and port. The default is often 192.168.0.10 for the IP address and 35000 for the port. However, consult your adapter’s documentation to confirm.
Finally, tap the green “Connect” button.
For future connections, ensure you’re connected to the OBD2 WiFi network and simply tap “Connect” in the Car Scanner app. You are now ready to explore the data your car has to offer. You have successfully connected to your car using the OBD2 WiFi port.
