Programming a new car key fob for your 2007 vehicle might seem daunting, but it can be a surprisingly straightforward DIY project. This guide provides step-by-step instructions for programming a new key fob without any specialized tools, potentially saving you a significant trip to the locksmith. This method has been verified to work on certain 2006 and 2007 Pontiac GTP and GT convertibles.
Programming Your 2007 Car Key Fob: A Step-by-Step Guide
While replacing the physical key often requires a locksmith for cutting and duplication, programming the key fob itself can often be done at home. Remember, this process erases all previously programmed fobs, so you’ll need to program all your fobs, old and new, during this procedure. Only program one vehicle at a time to avoid accidentally programming a fob to multiple cars.
Here’s how to program your 2007 car key fob:
Preparing for Programming
- Gather Your Materials: You’ll need all the key fobs you intend to use with the vehicle.
- Vehicle Positioning: For easier access, position yourself in the front passenger seat.
- Key Removal: Ensure the ignition key is removed from the ignition cylinder.
- Door Closure: Close all doors of the vehicle securely.
- Fuse Removal: Locate and remove the MALL PGM fuse from the vehicle’s fuse panel. Consult your owner’s manual or online resources for the fuse box location and diagram.
Entering Programming Mode
- Ignition Cycling: Turn the ignition to the ACC (Accessory) position. Quickly turn the ignition OFF and then back to ACC within one second.
- Door Activation: Open and close any vehicle door. A chime will sound, indicating the car has entered programming mode. If you don’t hear the chime, repeat steps 1-2.
Programming the Key Fobs
- Synchronization Chime: After approximately 7 seconds, a chime will confirm successful synchronization. A second chime around 14 seconds indicates successful programming initiation.
- Fob Button Activation: Press and hold both the LOCK and UNLOCK buttons on the key fob simultaneously for 14 seconds. You should hear a confirmation chime.
- Repeat for Additional Fobs: Repeat step 2 for each additional key fob, including any existing ones you want to continue using.
Completing the Process
- Key Removal: Remove the ignition key from the ignition cylinder.
- Fuse Replacement: Reinstall the MALL PGM fuse back into its designated slot in the fuse panel.
- Verification: Test all programmed key fobs to ensure they lock and unlock the vehicle’s doors correctly.
This process allows you to program your 2007 car key fob without specialized tools. While these instructions have been verified for certain Pontiac models, always consult your vehicle’s owner’s manual for specific procedures or consider seeking professional assistance if needed. Successfully programming your key fob yourself can save time and money.
